How to clean the hydraulic oil filter element?

　　Hydraulic oil filter commonly used in the hydraulic station, hydraulic system, to do regular cleaning, because the filter element in use after a period of time, has been the inside of the hydraulic oil stain blockage, thereby reach certain filtering effect, in order to ensure that the hydraulic oil filter, prolong life clearmed, environmental science and technology (kunshan) co., LTD., to teach you how to clean the hydraulic oil filter.

　　If the material of the hydraulic oil filter element is metal mesh or copper mesh, it can be soaked in kerosene for a period of time, and then washed by electric wind, so that the blocking stains inside can be cleaned up.

　　If the material of the hydraulic oil filter element is glass fiber or filter paper, it can not be cleaned, and cleaning will not work. In such a case, it is necessary to replace a new hydraulic oil filter element.

　　How to replace the hydraulic oil filter element?

　　If it is an oil absorption filter element, there is a built-in filter element and an external filter element. The built-in filter must be replaced by pumping the oil below the filter element. External directly remove the bolt outside the filter, the filter element will come out. At the same time the oil is locked by the one-way valve will not flow out, very convenient. If it is the oil return filter element, you can directly replace it.